HTB-Ⅲ type anticorrosive engineering plastic pump series

Properties
Seal: Non-standard Mechanical seal or Dynamic seal .Suitable medium: concentration 75% & less sulfuric acid, 50% & less nitric acid, all concentrations of hydrochloric acid, caustic soda, containing no solid granules or media that will be cured quickly. Technical Parameters: Operating temperature -20℃～90℃(we can use special materials for special requirements, can reach to 120℃), Diameter of inlet 32mm～100mm, Flow 5～100m3/h, Lift 50m & less.
Application
the circulation transportation of weak acid, hydrochloric acid and diluted nitric acid in phosphate compound fertilizer industry, sulphuric acid industry, environmental protection sewage, industrial wastewater treatment and so on.

Model

Codes of impeller materials

Materials	UHMWPE			Modified rubber	Fluoro-plastic alloy	PVDF	Chlorinated polyether	Stainless Steel
	Anticorrosive & wear-resisting	Heat-resisting & wear-resisting	Anticorrosive
Code	S	S1	S3	S2	S4	S5	S6	G
Note	not for U type pump

Codes of pump materials

Materials	UHMWPE			Modified rubber	Fluoro-plastic alloy	PVDF	Chlorinated polyether	Stainless Steel
	Anticorrosive & wear-resisting	Heat-resisting & wear-resisting	Anticorrosive
Code	U	U1	U3	U 2	U 4	U 5	U 6	G
Note

Structure type

Parameter details

Parameters \ Model	Specification of impeller	Rated Rev. 2900 r/Min.				Rated Rev. 1450 r/Min.				NPSH (m)	Weight (kg)
		Flow Q (m3/h)	Lift H (m)	Power of motor N Specific gravity of media 1.0 (Kw)	Efficiency η %	Flow Q (m3/h)	Lift H (m)	Power of motor N Specific gravity of media 1.0 (Kw)	Efficiency η %
HTB3.2/20	Standard	8	22	2.2	45	4	5.5	1.1	40	4	60
		12.5	20			6.25	5
		16	15			8	3
HTB5.0/32	Standard	20	33	5.5	51.5	10	8.2	1.5	45	5	110
		25	32			12	8
		30	30			15	7.5
HTB10.0/32-168	Standard	50	34	15	45	25	8.3	3	40	6	230
		60	32			30	8
		70	30			35	7
HTB10.0/50	Standard	70	52	30	61.5	35	13	5.5	56	5.5	230
		80	50			40	12.5
		90	48			45	12
HTB10.0/40	Standard	90	43	30	60	45	10.5	5.5	55	5.7	250
		100	40			50	10
		110	38			55	9
HTB10.0/15-M	Standard					35	15.5	5.5	57	3	230
						40	15
						45	14

Pump shape and Installation size

Installation size

Model	D1	D2	d1	d2	B1	B2	n1-s2	n2-s2	n3-s3	E	h1	h2	L1	L2	L3	L4	L	Weight(except motor) kg
HTB3.2/20-Ⅲ-U	32	25	100	85	260	32	4-M10	4-M10	4-φ18	81	160	110	97	336	97	308	804	60
HTB5.0/32-Ⅲ-U	50	40	125	110	320	50	4-M12	4-M12	4-φ20	98	212	150	160	400	160	320	992	110
HTB10.0/50-Ⅲ-U	100	80	210	185	385	100	4-φ18	4-φ18	4-φ20	140	335	200	188	665	207	380	1398	230
HTB10.0/15-M1-Ⅲ-U	100	80	210	185	385	100	4-φ18	4-φ18	4-φ20	140	335	200	180	504	180	380	1106	230
HTB10.0/32-168-Ⅲ-U	100	80	210	185	385	100	4-φ18	4-φ18	4-φ20	140	335	200	180	534	206	380	1236	230
HTB10.0/40-Ⅲ-U	100	80	210	185	385	100	8-φ18	4-φ18	4-φ20	136	335	200	188	665	207	405	1423	250